Front Subframe Torque

WARNING: This page is about a different car, the 2008 Acura TL and 2007 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

After removing the subframe mounting bolts, be sure to replace them with new ones.
When installing, align both installation reference holes in the subframe with both reference holes in the body using a screwdriver or tapered punch as a guide.
After mounting the subframe and barckets loosely, align the reference marks with the edge of the rear brackets, then tighten each bolts.

Fig 1: Front Subframe With Torque Specification