DTC 32-07: EPS Control Unit Internal Circuit (Current Sensor) (Steering diagnosis)
- Clear the DTC with the HDS.
- Turn the ignition switch OFF.
- Start the engine.
- Turn the steering wheel to the right or left, and wait 10 seconds or more.
Does the EPS indicator come on?
YES -Go to step 5.
NO -Check for loose terminals or poor connections. If the connections are good, the system is OK at this time.
- Check for DTCs with the HDS.
Is DTC 32-07 indicated?
YES -Check for loose terminals in the EPS control unit connectors, and repair if necessary. If no poor connections are found, replace the EPS control unit (see EPS CONTROL UNIT REMOVAL/INSTALLATION ).
NO -Troubleshoot the indicated DTC. If there are no DTCs, the system is OK at this time.