Interface Dial Inputs and Outputs for 5P Connector
VOLTAGE SPECIFICATION
| Terminal Number | Wire Color | Terminal Name | Description | Voltage (about) | Symptom |
|---|---|---|---|---|---|
| 1 | BLU | JOG (jog) | Interface dial operation signal | 0-5 V pulses | If open: You can not operate navigation system. If short to ground: You can not operate navigation system. |
| 2 | GRV | SH JOG (Shield jog) | Shield for interface dial signal | - | - |
| 3 | BLK | GND (Ground) | Ground for interface dial | 0 V | If open: You can not operate navigation system. If short to ground: You can not operate navigation system. |
| 4 | PUR | ACC (Accessory) | Power source for interface dial | Battery voltage at ACC (I) | If open: You can not operate navigation system. If short to ground: Blows No. 35 (7.5 A) fuse in the under-dash fuse/relay box. |
| *: The shielded drain wires have a heat-shrunk tube insulating the outside of the wire. The color of the insulating tube, typically black or dark gray, may not match the color of the wire listed on the schematic. | |||||