LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2007 >> RDX >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Navigation System >> Navigation Switch Panel Removal/Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Navigation Switch Panel Removal/Installation

  1. Remove the center panel (see CENTER PANEL REMOVAL/INSTALLATION ).
  2. Remove the screws and navigation switch panel (A) from the center panel.
    Fig 1: Identifying Navigation Switch Panel
    G05446660Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the screws (A) and jog dial (B) from the interface dial (G).
    Fig 2: Identifying Jog Dial, Interface Dial And Connector
    G05446661Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Disconnect the connector (D), then remove the interface dial.
  5. If necessary, remove the screws (E) and cover (F), then remove the bulbs.
  6. Install the dial in the reverse order of removal.
scientia non olet · About LEMON Manuals