Hood Switch Test
- Open the hood.
- Remove the cover (see
HOOD LATCH REPLACEMENT
).
- Disconnect the 2P connector from the hood switch.
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Check for continuity between the terminals.
- There should be continuity between the No. 1 and No. 2 terminals when the hood is opened (latch released).
- There should be no continuity between the No. 1 and No. 2 terminals when the hood is closed and completely latched.
- If the continuity is not as specified, replace the hood latch assembly (see
HOOD LATCH REPLACEMENT
).