Slide motor, Front up-down motor, Rear up-down motor
- Remove the driver's seat (see FRONT SEAT REMOVAL/INSTALLATION ).
- Disconnect the connector from each power seat motor.NOTE: All connectors are terminal side of male terminals.
- Test each motor by connecting power and ground as shown (see Fig 2). When the motor stops running, disconnect battery power immediately.
- If the motor does not run or fails to run smoothly, replace it:
- Slide motor (see FRONT SEAT LINKAGE DISASSEMBLY/REASSEMBLY )
- Front up-down motor (see FRONT SEAT LINKAGE DISASSEMBLY/REASSEMBLY )
- Rear up-down motor (see FRONT SEAT LINKAGE DISASSEMBLY/REASSEMBLY )