Passenger's Power Window Switch Test/Replacement: Rear
WARNING: This page is about a different car, the 2008 Acura TL and 2007 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the rear door panel and arm rest (see FRONT DOOR WEATHERSTRIP REPLACEMENT ).
- Remove the screw and disconnect the connector (A) from the rear power window switch (B), then remove the switch assembly from the door panel.
- Remove the three mounting screws, then remove the rear power window switch from the switch panel (C).
- Swap the rear power window switch with another known-good switch and test. If the original rear power window switch is faulty; replace it.
- Install in the reverse order of removal.