Keyless Buzzer Test/Replacement

WARNING: This page is about a different car, the 2008 Acura TL and 2007 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.

Remove the left inner fender (see FRONT INNER FENDER REPLACEMENT ).
Disconnect the 2P connector (A) from the keyless buzzer (B).

Fig 1: Identifying Keyless Buzzer 2P Connector
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Test the buzzer by connection battery power to the No. 1 terminal and grounding the No. 2 terminal of the buzzer momentarily; the buzzer should sound.
If the buzzer does not replace the keyless buzzer by releasing the hooks.

Fig 2: Identifying Keyless Buzzer
Courtesy of AMERICAN HONDA MOTOR CO., INC.