Error code: XM ANTENNA is displayed
NOTE:
- Check the vehicle battery condition first.
- Check the connectors for poor connections or loose terminals.
- Check the connector at the XM receiver (without AcuraLink) or the AcuraLink control unit (XM receiver) (with AcuraLink).
Is the connector connected?
YES -Go to step 2.
NO -Reconnect the connector. If the error message does not go away, go to step 2.
- Check the connector at the XM antenna.
Is the connector connected?
YES -Go to step 3.
NO -Reconnect the connector. If the error message does not go away, go to step 3.
- Substitute a known-good XM antenna.
Is the error message gone?
YES -Replace the XM antenna.
NO -Substitute a known-good XM antenna lead and recheck. If the XM receiver or AcuraLink control unit (XM receiver) receives a signal, replace the original XM antenna lead; If the symptom/ indication is still present, replace the XM receiver or AcuraLink control unit (XM receiver).