LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2007 >> TL Base >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Immobilizer System >> Immobilizer Control Unit-Receiver Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Immobilizer Control Unit-Receiver Replacement

NOTE: Requires ECM/PCM code and all of the client's keys.
  1. Remove the driver's dashboard lower cover (see DRIVER'S DASHBOARD LOWER COVER REMOVAL/INSTALLATION ).
  2. Remove the steering column covers (see STEERING COLUMN REMOVAL AND INSTALLATION ).
  3. Disconnect the 7P connector (A) from the immobilizer control unit-receiver (B).
    Fig 1: Identifying 7P Connector From Immobilizer Control Unit-Receiver
    G05462887Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Remove the two screws and the immobilizer control unit-receiver from the ignition key cylinder (C).
  5. Install the immobilizer control unit-receiver in the reverse order of removal.
  6. After replacement, register the immobilizer control unit-receiver (see IMMOBILIZER KEY REGISTRATION  ), and make sure the immobilizer system works properly.
scientia non olet · About LEMON Manuals