LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2007 >> TL Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> 3rd Clutch Transmission Fluid Pressure Switch Replacement
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

3rd Clutch Transmission Fluid Pressure Switch Replacement

  1. Remove the splash shield.
  2. Disconnect the 3rd clutch transmission fluid pressure switch connector, and remove the 3rd clutch transmission fluid pressure switch (A) and the sealing washer (B).
    Fig 1: Locating 3rd Clutch Transmission Fluid Pressure Switch And Sealing Washer With Torque Specifications
    G05458992Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Install a new 3rd clutch transmission fluid pressure switch and a new sealing washer, and tighten the switch.
  4. Make sure there is no water, oil, dust, or foreign particles inside the connector.
  5. Connect the connector securely.
  6. Install the splash shield.
scientia non olet · About LEMON Manuals