Audio-HVAC Subdisplay Unit Connector Inputs and Outputs
When replacing an audio-HVAC subdisplay unit connector, match the wires to the cavities listed in the following table.
Audio-HVAC Subdisplay Unit Connector (10P)
AUDIO-HVAC SUBDISPLAY UNIT CONNECTOR (10P)
| Cavity | Wire | Connects to | Cavity | Wire | Connects to | ||||
|---|---|---|---|---|---|---|---|---|---|
| 1 | BLK | CLOCK GND(5V) | 6 | BLU/RED(1) | DATA | ||||
| ORN(2) | |||||||||
| 2 | BLU/ORN(1) | CLOCK 5 V | 7 | BLU | CE (LOAD) | ||||
| BUT(2) | |||||||||
| 3 | BLK | GND | 8 | GRY | SHIELDING GND | ||||
| 4 | YEL/RED(1) | RESET | 9 | RED | LCD BACKLIGHT (+) | ||||
| YEL(2) | |||||||||
| 5 | YEL(1) | CLOCK | 10 | GRN | LCD BACKLIGHT (-) | ||||
| PUR(2) | |||||||||
|
|||||||||