LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2007 >> TSX Standard >> Repair and Diagnosis >> Engine Performance >> System >> PGM-FI System >> IAT Sensor Replacement
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

IAT Sensor Replacement

  1. Disconnect the IAT sensor 2P connector (A).
    Fig 1: Identifying IAT Sensor 2P Connector And IAT Sensor
    G05490635Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Remove the clamp (B) and the IAT sensor (C).
  3. Install the parts in the reverse order of removal.
scientia non olet · About LEMON Manuals