LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2008 >> RDX >> Repair and Diagnosis (Single Page) >> Engine Performance >> Engine Control Systems >> Electronic Throttle Control System >> Accelerator Pedal Module Removal/Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Accelerator Pedal Module Removal/Installation

  1. Disconnect the accelerator pedal module 6P connector (A).
    Fig 1: 6P Connector And Accelerator Pedal Module With Torque Specifications
    G05447022Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Remove the accelerator pedal module (B).
    NOTE: The APP sensor is not available separately. Do not disassemble the accelerator pedal module.
  3. Install the parts in the reverse order of removal.
scientia non olet · About LEMON Manuals