Gauge Control Module Replacement

NOTE: Before replacing the gauge control module, do the "Rewriting the ODO Data and Transferring the Maintenance Minder on a New Gauge Control Module" (see REWRITING THE ODO DATA AND TRANSFERRING THE MAINTENANCE MINDER ON A NEW GAUGE CONTROL MODULE ).

Remove the instrument fascia (see DRIVER'S SWITCH PANEL REMOVAL/INSTALLATION ).
Remove the screws from the gauge control module (A).

Fig 1: Identifying Gauge Control Module With Screws
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Disconnect the connectors (B), and remove the gauge control module.
Install the gauge control module in the reverse order of removal.