Slide motor, Front up-down motor, Rear up-down motor

Remove the driver's seat (see FRONT SEAT REMOVAL/INSTALLATION ).
Disconnect the connector from each power seat motor.
NOTE: All connectors are terminal side of male terminals.

Fig 1: Identifying Power Seat Motor Connector Terminals
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Test each motor by connecting power and ground as shown (see Fig 2). When the motor stops running, disconnect battery power immediately.

Fig 2: Testing Each Motor's Operation By Connecting Power And Ground As Shown
Courtesy of AMERICAN HONDA MOTOR CO., INC.
If the motor does not run or fails to run smoothly, replace it:
- Slide motor (see FRONT SEAT LINKAGE DISASSEMBLY/REASSEMBLY )
- Front up-down motor (see FRONT SEAT LINKAGE DISASSEMBLY/REASSEMBLY )
- Rear up-down motor (see FRONT SEAT LINKAGE DISASSEMBLY/REASSEMBLY )