ABS Modulator-Control Unit Removal and Installation: Removal

Disconnect the ABS modulator-control unit 25P connector (A) by pulling up the lock (B); the connector disconnects itself.

Fig 1: Exploded View Of ABS Modulator-Control Unit With Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Disconnect the six brake lines from the ABS modulator-control unit.
NOTE: Brake lines are connected to the master cylinder (C) and to the right-front (D), the left-rear (E), the right-rear (F), and the left-front (G) brake systems.
Remove the ABS modulator-control unit (H) with the brackets (I) from the body.
Remove the ABS modulator-control unit from the brackets.
Separate the bracket if necessary.