Ignition Switch Replacement

WARNING: This page is about a different car, the 2011 Acura TL, 2010 Acura TL, and 2009 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: SRS components are located in the area Review the SRS component locations (see COMPONENT LOCATION INDEX ) and precautions and procedures (see PRECAUTIONS AND PROCEDURES ) before doing repairs or servicing

Do the battery terminal disconnection procedure (see BATTERY TERMINAL DISCONNECTION AND RECONNECTION )
Remove the steering column covers (see STEERING COLUMN COVER REMOVAL/INSTALLATION )
Disconnect the 5P connector (A) from the ignition switch (B)

Fig 1: Disconnecting 5P Connector From Ignition Switch
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the two screws and the ignition switch
Install the parts in the reverse order of removal
Do the battery terminal reconnection procedure (see BATTERY TERMINAL DISCONNECTION AND RECONNECTION )