DTC 91,93,95,97: Tire Pressure Sensor Internal Error

WARNING: This page is about a different car, the 2011 Acura TL, 2010 Acura TL, and 2009 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.

Turn the ignition switch to ON (II), or press the engine start/stop button to select the ON mode
Clear the DTC with the HDS
Turn the ignition switch to LOCK (0), then turn it to ON (II) again, or select the OFF mode, then the ON mode
Wait about 1 minute

Check for DTCs with the HDS

NOTE: The tire pressure sensor of the appropriate wheel is shown

DTC CHART

DTC	Tire Location
91	Right-front
93	Left-front
95	Right-rear
97	Left-rear

Is DTC 91, 93, 95, or 97 indicated?

YES -Replace the appropriate tire pressure sensor (see REAR )

NO -The system is OK at this time