Audio disc does not eject (without navigation)
WARNING: This page is about a different car, the 2011 Acura TL, 2010 Acura TL, and 2009 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- Check the vehicle battery condition first (see BATTERY TEST )
- Disc labels should not be used in the audio unit They may jam and damage the player mechanism
- Check the connectors for poor connections or loose terminals
- Turn the ignition switch to ON (II), or press the engine start/stop button to select the ON mode
- Turn on the audio unit
Does the system turn on?
YES -Go to step 3
NO -Go to audio unit power switch will not turn on (see AUDIO UNIT POWER SWITCH WILL NOT TURN ON (NO INFORMATION DISPLAY AND NO SOUND) (WITHOUT NAVIGATION) )
- Check to see if the disc ejects correctly with no binding when you push the EJECT button
Does the disc eject properly?
YES -Operation is normal
NO -Substitute a known-good audio unit (see AUDIO UNIT REMOVAL/INSTALLATION ) If the symptom/indication goes away, replace the orinal audio unit