Audio disc does not load (without navigation)
WARNING: This page is about a different car, the 2011 Acura TL, 2010 Acura TL, and 2009 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- Check the vehicle battery condition first (see BATTERY TEST )
- Check the connectors for poor connections or loose terminals
- Disc labels should not be used in the audio unit They may jam and damage the player mechanism
- Make sure the audio disc is compatible with the system (see the owner's manual for more information)
- Turn the ignition switch to ON (II), or press the engine start/stop button to select the ON mode
- Turn on the audio unit, and insert a known-good disc to see if the symptom can be duplicated
Does the disc load?
YES -Operation is normal If the disc loads normally, but will not play, go to Audio disc does not play (see Audio disc does not play (without navigation) )
NO -Go to step 3
- Insert another disc
Does the disc load?
YES -The original disc is faulty?
NO -Substitute a known-good audio unit (see AUDIO UNIT REMOVAL/INSTALLATION ) If the symptom/indication goes away, replace the original audio unit?