RF Unit 2 Replacement

WARNING: This page is about a different car, the 2010 Acura TL and 2009 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.

Remove the rear seat-back (see REAR SEAT REMOVAL/INSTALLATION ).
Disconnect the 3P connector (A) from RF unit 2 (B).

Fig 1: Identifying RF Unit 2 3P Connector
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the nut and the clip, then remove RF unit 2.
Install the unit in the reverse order of removal.