XM Receiver Connector for Inputs and Outputs (With navigation)

Fig 1: Identifying XM Receiver Inputs And Outputs Connector (With Navigation)

Courtesy of AMERICAN HONDA MOTOR CO., INC.

XM RECEIVER CONNECTOR A (14P)

Fig 2: Identifying XM Receiver Connector A (14P)

Courtesy of AMERICAN HONDA MOTOR CO., INC.

WIRE COLOR REFERENCE CHART

Cavity

Wire Color

Connect to

BLU

Navigation unit, USB adapter unit (+B)

LT BLU

Navigation unit, USB adapter unit (SYS ACC)

BRN⁽¹⁾

Shield for terminals No. 9 and No. 10 (GA-NET SH GND)

WHT

Navigation unit, USB adapter unit (SAT R+)

RED

Navigation unit, USB adapter unit (SAT L+)

BLU

Navigation unit, USB adapter unit (GA-NET BUS+)

A10

PNK

Navigation unit, USB adapter unit (GA-NET BUS-)

A11

BLK

Navigation unit, USB adapter unit (GND)

A13

BLK

Navigation unit, USB adapter unit (SAT R-)

A14

GRN

Navigation unit, USB adapter unit (SAT L-)

⁽¹⁾	The shielded wires have a heat-shrunk tube insulating the outside of the wire. The color of the insulating tube, typically black or dark gray, may not match the color of the wire listed on the schematic.

XM RECEIVER CONNECTOR B (2P)

Fig 3: Identifying XM Receiver Connector B (2P)

Courtesy of AMERICAN HONDA MOTOR CO., INC.

WIRE COLOR REFERENCE CHART

Cavity	Wire Color	Connect to
B1	--	Satellite signal antenna (SAT/TER)
B2	--	Shield for terminal No. 1 (GND SH)