Immobilizer code is not identified
WARNING: This page is about a different car, the 2011 Acura TL, 2010 Acura TL, and 2009 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
If the immobilizer code is not identified, the immobilizer indicator will quickly flash once, then will blink until the ignition switch is turned to LOCK(0) When the ignition switch is turned to LOCK (0), the indicator will blink ten times, then go OFF to show the system is correctly reset
The state of the immobilizer key registration and the IMOCD (S-NET) line can be checked by doing a SYSTEM CHECK and STATUS LOG CHECK with the HDS (see SYSTEM CHECK and Status Log )