With SH-AWD
WARNING: This page is about a different car, the 2011 Acura TL, 2010 Acura TL, and 2009 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the trunk front trim panel (see TRIM REMOVAL/INSTALLATION - TRUNK AREA )
- Remove the access panel (A) from the floor
- Disconnect the hose (A) and the FTP sensor 3P connector (B)
- Remove the FTP sensor (C)
- Install the parts in the reverse order of removal with a new O-ring (D) and a new retainer (E)