LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2009 >> CSX Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 47 (Audio System) >> Audio-HVAC Display Unit Removal/Installation >> Without Navigation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Without Navigation

WARNING: This page is about a different car, the 2011 Acura TL, 2010 Acura TL, and 2009 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • Put on gloves to protect your hands
  • Take care not to scratch the dashboard and related parts
  • Lay a shop towel under the parts when working on them to protect the face panel from scratches or other damage
  1. Remove the dashboard center vent (see DASHBOARD CENTER VENT REMOVAL/INSTALLATION )
  2. Carefully remove the screws from the audio-HVAC display unit (A)
    Fig 1: Identifying Audio-HVAC Display Unit With Screws
    G05989655Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Pull out the audio-HVAC display unit Then disconnect the connector (A) from the audio-HVAC display unit
    Fig 2: Disconnecting Connector From Audio-HVAC Display Unit
    G05989656Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Install the audio-HVAC display unit in the reverse order of removal