Speaker Test/Replacement: Subwoofer
WARNING: This page is about a different car, the 2011 Acura TL, 2010 Acura TL, and 2009 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the rear shelf (see TRIM REMOVAL/INSTALLATION - REAR SHELF AREA )
- Remove the four mounting bolts from the subwoofer (A)
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Bolt Specifications: 6 x 1.0 mm, 9.4 N.m (0.95 kgf m, 6.9 lbf ft
- Disconnect the 2P connector (B), and remove the subwoofer
- Measure the resistance between the terminals No 1 and No 2 There should be about 2 Ω
- If the resistance is not as specified, replace the subwoofer