Front Passenger's Power Window Switch Replacement

WARNING: This page is about a different car, the 2011 Acura TL, 2010 Acura TL, and 2009 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.

Remove the passenger's door armrest (see step 12 on FRONT DOOR PANEL REMOVAL/INSTALLATION )
Remove the two screws (A), then remove the bracket (B) from the armrest assembly (C)

Fig 1: Identifying Front Passenger's Power Window Switch And Screws
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the four screws and the front passenger's power window switch (D)
Install the switch in the reverse order or removal
After replacement, reset the power window control unit (see RESETTING THE POWER WINDOW CONTROL UNIT )