LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2009 >> CSX Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 56 (Power Window System) >> Power Window Master Switch Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Power Window Master Switch Replacement

WARNING: This page is about a different car, the 2011 Acura TL, 2010 Acura TL, and 2009 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the driver's door armrest (see step 12 on FRONT DOOR PANEL REMOVAL/INSTALLATION )
  2. Remove the two screws (A), then remove the bracket (B) from the armrest assembly (C)
    Fig 1: Identifying Power Window Master Switch And Screws
    G05989023Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the four screws and the power window master switch (D)
  4. Install the switch in the reverse order of removal
  5. After replacement, reset the power window control unit (see RESETTING THE POWER WINDOW CONTROL UNIT )
scientia non olet · About LEMON Manuals