Functional Test
WARNING: This page is about a different car, the 2011 Acura TL, 2010 Acura TL, and 2009 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
- With the ignition switch in LOCK (0), or press the engine start/stop button to select the OFF mode, press the brake pedal several times to deplete the vacuum reservoir, then press the brake pedal hard, and hold it for 15 seconds If the brake pedal sinks, either the master cylinder is bypassing internally, or the brake system is leaking Inspect the brake hoses and lines (see BRAKE HOSE AND LINE INSPECTION )
- Start the engine with the brake pedal pressed If the brake pedal sinks slightly, the vacuum booster is operating normally If the brake pedal height does not vary, do the brake system test (see BRAKE SYSTEM INSPECTION AND TEST )