Knock Sensor Replacement

WARNING: This page is about a different car, the 2011 Acura TL, 2010 Acura TL, and 2009 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.

Remove the intake manifold (see INTAKE MANIFOLD REMOVAL AND INSTALLATION ).
Remove the injector base (see INJECTOR BASE REMOVAL AND INSTALLATION ).
Disconnect the knock sensor connector (A).

Fig 1: Lnock Sensor With Connector With Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the knock sensor (B).
Install the parts in the reverse order of removal.