MAF Sensor/IAT Sensor Replacement
WARNING: This page is about a different car, the 2011 Acura TL, 2010 Acura TL, and 2009 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the MAF sensor/IAT sensor 5P connector (A).
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Remove the screws (B).
- Remove the MAF sensor/IAT sensor (C).
- Install the parts in the reverse order of removal with a new O-ring (D).