DTC B1001: MICU Internal (CPU) Error; DTC B1002: MICU Internal (EEPROM) Error
NOTE:
If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A (see
TROUBLESHOOTING - B-CAN SYSTEM DIAGNOSIS TEST MODE A ).
- Clear the DTCs with the HDS.
- Turn the ignition switch to LOCK (0) and then back to ON (II).
- Wait for at least 6 seconds.
- Check for DTCs with the HDS.
Is DTC B1001 and/or B1002 indicated?
YES -Faulty MICU, replace the driver's under-dash fuse/relay box.
NO -Intermittent failure, the system is OK at this time.