LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2009 >> RL >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Navigation System >> System Description >> Rearview Camera Inputs and Outputs
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Rearview Camera Inputs and Outputs

Fig 1: Identifying Rearview Camera 6P Connector
G06163009Courtesy of AMERICAN HONDA MOTOR CO., INC.

Rearview Camera 6P Connector 

REARVIEW CAMERA 6P CONNECTOR REFERENCE

Terminal Number Wire Color Terminal Name Description Voltage (about) Symptom
1 WHT CAMERA VCC (VCC supply) Power source for rearview camera 8V If open: No rearview camera image.
If short to ground: When put into reverse, the navigation screen goes black (display backlight still operative).
2 BLK RC GND (Ground camera) Ground for camera signal 0 V If open: No change to rearview camera image.
If short to ground: No change to rearview camera image.
3 RED CAMERA GND (Ground) Ground for rearview camera 0 V If open: No change to rearview camera image.
If short to ground: No change to rearview camera image.
4 YEL VIDEO (Video camera) Video signal for rearview camera 0.3 V If open: No change to rearview camera image.
If short to ground: No change to rearview camera image.
5 GRY(1) CAMERA SH (Shield camera) Shield for terminals No. 1, 2, 3, 4, 6 0 V If open: No change to rearview camera image.
If short to ground: No change to rearview camera image.
6 GRN CAMERA ADPT (Adaptive camera) Control signal for rearview camera 0 V If open: No change to rearview camera image.
If short to ground: No change to rearview camera image.
(1) The shielded wires have a heat-shrink tube insulating the outside of the wire. The color of the insulating tube, typically black or dark gray, may not match the color of the wire shown on the circuit diagram.
scientia non olet · About LEMON Manuals