LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2009 >> RL >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Engine Lubrication System >> Oil Pressure Switch Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Oil Pressure Switch Replacement

  1. Disconnect the oil pressure switch connector, then remove the oil pressure switch (A).
    Fig 1: Oil Pressure Switch With Torque Specifications
    G06163591Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Remove all of the old liquid gasket from the switch and the switch mounting hole.
  3. Apply a very small amount of liquid gasket to the oil pressure switch threads, then install the oil pressure switch with a new O-ring (B).
    NOTE: Using too much liquid gasket may cause liquid gasket to enter the oil passage or the end of the new oil pressure switch.
  4. Connect the oil pressure switch connector.
scientia non olet · About LEMON Manuals