With Navigation

SRS components are located in this area Review the SRS component locations (see COMPONENT LOCATION INDEX ), and the precautions and procedures (see PRECAUTIONS AND PROCEDURES ) before doing repairs or service

NOTE:

Put on gloves to protect your hands
Take care not to scratch the dashboard and related parts
Lay a shop towel under the parts when working on them to protect the face panel from scratches or other damage
Eject all the discs before removing the audio-navigation unit to prevent damaging the CD/DVD player's load mechanism
Discharge static electricity from your body before and during the work

Remove the audio-navigation unit (see AUDIO-NAVIGATION UNIT REMOVAL/INSTALLATION )
Remove the interface dial (see HFL-NAVIGATION MICROPHONE REMOVAL/INSTALLATION ) Do not touch the terminal connector (A) of the audio-navigation switch panel with your bare hands (If you have touched it, wipe it off thoroughly)

Fig 1: Identifying Audio-Navigation Switch Panel Terminal Connector
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the audio-navigation switch panel in the reverse order of removal