Recirculation Control Motor Replacement: Removal

1. Remove the passenger's dashboard undercover (see PASSENGER'S DASHBOARD UNDERCOVER REMOVAL/INSTALLATION )
2. Remove the glove box (see GLOVE BOX REMOVAL/INSTALLATION )
3. Remove the climate control unit (see CLIMATE CONTROL UNIT REMOVAL/INSTALLATION )
4. Disconnect the 7P connector (A) from the recirculation control motor (B) Remove the self-tapping screws and the recirculation control motor from the blower unit

Fig 1: Identifying Recirculation Control Motor And 7P Connector

Courtesy of AMERICAN HONDA MOTOR CO., INC.