Rearview Camera Inputs and Outputs
REARVIEW CAMERA 12P CONNECTOR TERMINAL REFERENCE
| Terminal Number | Wire Color | Terminal Name | Description | Voltage (about) | Symptom | ||
|---|---|---|---|---|---|---|---|
| 7 | BRN | CAMERA ADPT (Adaptive camera) | Control signal for rearview camera | 0V | If open No change to rearview camera image If short to ground No change to rearview camera image |
||
| 8 | GRY(1) | CAMERA SH (Shield camera) | Shield for terminals No 7, 9, 10, 11, 12 | 0V | If open No change to rearview camera image If short to ground No effect on system |
||
| 9 | WHT | CAMERA V (Video camera) | Video signal for rearview camera | 0 3 V | If open No change to rearview camera image If short to ground No change to rearview camera image |
||
| 10 | RED | VCC GND (Ground camera) | Ground for camera signal | 0V | If open No change to rearview camera image If short to ground No change to rearview camera image |
||
| 11 | BLK | CAMERA GND (Ground) | Ground for rearview camera | 0V | If open No change to rearview camera image If short to ground No change to rearview camera image |
||
| 12 | GRN | CAMERA VCC (VCC supply) | Power source for rearview camera | 8V | If open No rearview camera image If short to ground When put into reverse, the navigation screen goes black (display backlight still operative) |
||
|
|||||||