Immobilizer-keyless Control Unit Replacement

NOTE: SRS components are located in this area. Review the SRS component locations, precautions and procedures before doing repairs or servicing. See COMPONENT LOCATION INDEX , also see PRECAUTIONS AND PROCEDURES .

Remove the steering column covers (see STEERING COLUMN COVER REMOVAL/INSTALLATION )
Disconnect the 7P connector (A) from the immobilizer-keyless control unit (B)

Fig 1: Identifying Immobilizer-Keyless Control Unit And 7P Connector

Courtesy of AMERICAN HONDA MOTOR CO., INC.

Remove the two screws and the immobilizer-keyless control unit
Install the immobilizer-keyless control unit in the reverse order of removal
After replacement, register the immobilizer-keyless control unit (see IMMOBILIZER KEY REGISTRATION ), and make sure the immobilizer system works properly
Program all of the client's keys/keyless transmitters (see IMMOBILIZER KEY REGISTRATION )