DTC P062F: ECM/PCM Internal Control Module Keep Alive Memory (KAM) Error
NOTE:
Before you troubleshoot, record all freeze data and any on-board snapshot, and review the general troubleshooting information (see
GENERAL TROUBLESHOOTING INFORMATION
)
- Turn the ignition switch to ON (II)
- Clear the DTC with the HDS
- Check for Temporary DTCs or DTCs with the HDS
Is DTC P062F indicated?
YES -Go to step 4
NO -Intermittent failure, the system is OK at this time
- Update the ECM/PCM if it does not have the latest software (see ECM/PCM UPDATE ), or substitute a known-good ECM/PCM (see SUBSTITUTING THE ECM/PCM )
- Check for Temporary DTCs or DTCs with the HDS
Is DTC P062F indicated?
YES -If the ECM/PCM was updated, substitute a known-good ECM/PCM (see SUBSTITUTING THE ECM/PCM ), then recheck If the ECM/PCM was substituted, go to step 1
NO -If the ECM/PCM was updated, troubleshooting is complete If the ECM/PCM was substituted, replace the original ECM/PCM (see ECM/PCM REPLACEMENT ) If any other Temporary DTCs or DTCs are indicated, go to the indicated DTC's troubleshooting