Evaporator Temperature Sensor Replacement

WARNING: This page is about a different car, the 2008 Acura TSX, 2007 Acura TSX, 2006 Acura TSX, 2005 Acura TSX, and 2004 Acura TSX. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the 2P connector (A) from the evaporator temperature sensor (B), then remove the connector clip (G). Remove the self-tapping screw, and carefully pull out the evaporator temperature.

Fig 1: Identifying 2P Connector, Evaporator Temperature Sensor And Connector Clip
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the sensor in the reverse order of removal.