Audio-HVAC Subdisplay Unit Connector Inputs and Outputs
WARNING: This page is about a different car, the 2008 Acura TSX, 2007 Acura TSX, 2006 Acura TSX, 2005 Acura TSX, and 2004 Acura TSX. However, it is still accessible from the selected car via links, so may be relevant.
When replacing an audio-HVAC subdisplay unit connector, match the wires to the cavities listed in the following table.
Audio-HVAC Subdisplay Unit Connector (10P)
AUDIO-HVAC SUBDISPLAY UNIT CONNECTOR (10P)
| Cavity | Wire | Connects to | Cavity | Wire | Connects to | ||||
|---|---|---|---|---|---|---|---|---|---|
| 1 | BLK | CLOCK GND(5V) | 6 | BLU/RED(1) | DATA | ||||
| ORN(2) | |||||||||
| 2 | BLU/ORN(1) | CLOCK 5 V | 7 | BLU | CE (LOAD) | ||||
| BUT(2) | |||||||||
| 3 | BLK | GND | 8 | GRY | SHIELDING GND | ||||
| 4 | YEL/RED(1) | RESET | 9 | RED | LCD BACKLIGHT (+) | ||||
| YEL(2) | |||||||||
| 5 | YEL(1) | CLOCK | 10 | GRN | LCD BACKLIGHT (-) | ||||
| PUR(2) | |||||||||
|
|||||||||