Hood Switch Test
WARNING: This page is about a different car, the 2008 Acura TSX, 2007 Acura TSX, 2006 Acura TSX, 2005 Acura TSX, and 2004 Acura TSX. However, it is still accessible from the selected car via links, so may be relevant.
- Open the hood.
- Disconnect the 2P connector (A) from the hood switch.
- Check for continuity between the terminals.
- There should be continuity between the No. 1 and No. 2 terminals when the hood is opened (lever released). There should be no continuity between the No. 1 and No. 2 terminals when the hood is closed (lever pushed down).
- If the continuity is not as specified, replace the hood switch.