Rocker Arm Oil Control Valve Removal/Installation
- Remove the charge air cooler cover (see step 1 under CHARGE AIR COOLER REMOVAL AND INSTALLATION
).
- Remove the turbocharger cover (see step 4 under WARM UP TWC REMOVAL/INSTALLATION
).
- Disconnect the rocker arm oil control solenoid connector (A) and the rocker arm oil pressure switch connector (B).
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Remove the water hose upper cover (C).
- Remove the rocker arm oil control valve (D) and cover (E).
- Install the parts in the reverse order of removal with a new solenoid valve filter (F).