Power Window Switch Replacement: Driver's

Remove the driver's door panel (see FRONT DOOR PANEL REMOVAL/INSTALLATION ).
Disconnect the 22P connector (A) from the power window master switch.

Fig 1: Identifying Power Window Master Switch, 22P Connector And Harness Clips
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the harness clips (B) from the driver's door panel.
Remove the three screws from the door panel, then pull out the utility pocket (C).
Remove the three screws and the power window master switch (A) from the door panel.

Fig 2: Identifying Power Window Master Switch
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the four screws and the power window master switch (A) from the switch panel.

Fig 3: Identifying Power Window Master Switch
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the switch in the reverse order of removal.
After replacement, reset the power window control unit (see RESETTING THE POWER WINDOW CONTROL UNIT ).