Without SH-AWD

Remove the bolt (A), and disconnect the EVAP canister vent shut valve 2P connector (B), the FTP sensor 3P connector (C), and the hoses (D)

Fig 1: EVAP Canister Vent Shut Valve 2P Connector And FTP Sensor 3P Connector With Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the bolts (E), and move the EVAP canister assembly (F) to the rear
Remove the FTP sensor (A)

Fig 2: Identifying FTP Sensor
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the parts in the reverse order of removal with a new O-ring (B) and a new retainer (C)