LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2011 >> TL Base >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Engine Lubrication >> Oil Pressure Switch Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Oil Pressure Switch Replacement

  1. Disconnect the oil pressure switch connector (A), then remove the oil pressure switch (B)
    Fig 1: Oil Pressure Switch Connector And Oil Pressure Switch With Torque Specification
    G05987097Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Remove all of the old liquid gasket from the switch and the switch mounting hole
  3. Apply a very small amount of liquid gasket to the oil pressure switch threads, then install the oil pressure switch with a new O-ring (C)
    NOTE: Using too much liquid gasket may cause liquid gasket to enter the oil passage or the end of the new oil pressure switch
  4. Install the oil pressure switch with a new O-ring
  5. Connect the oil pressure switch connector
scientia non olet · About LEMON Manuals