Communications Control Module: Service and Repair

HandsFreeLink Control Unit Removal/Installation

NOTE: Tell the client they need to write down all phone numbers stored in the HFL and the navigation imported phone book as there is no way to transfer the information in the original HandsFreeLink control unit to a new HandsFreeLink control unit.

1. Remove the passenger's dashboard undercover.

2. Remove the passenger's center console trim.

3. Remove the self-tapping screws, and HandsFreeLink control unit (A).





4. Install the HandsFreeLink control unit in the reverse order of removal.

After replacing the HandsFreeLink control unit, tell the client:

- They need to pair their phones to the system.
- They need to set up their system preferences.