Power Tilt/Telescopic Steering Motor Test
- Remove the steering column covers (see COLUMN COVER REMOVAL/INSTALLATION ).
- Disconnect the 6P connector and 8P connector from the power tilt/telescopic steering motors.
- Check each motor by connecting power and ground according to the table. When the motor stops running, disconnect battery power immediately.POWER TILT MOTOR
Terminal 2 3 Position TILT UP (-) (+) TILT DOWN (+) (-) POWER TELESCOPIC MOTORTerminal 1 2 Position TELESCOPIC IN (-) (+) TELESCOPIC OUT (+) (-) - If the motor does not run or fails to run smoothly; replace the steering column assembly (see STEERING COLUMN REMOVAL AND INSTALLATION ).