Audio-Navigation Unit Connector E (16P) (with rear entertainment)

Fig 1: Identifying Audio-Navigation Unit Connector E (16P) Connector Terminals (With Rear Entertainment)

Courtesy of AMERICAN HONDA MOTOR CO., INC.

Cavity	Wire Color	Terminal Name	Connect to
E1	BRN(1)	AUX VIDEO IN SH	Shield for terminals No. 2 and No. 9
E2	LT BLU	AUX VIDEO IN GND	RES auxiliary jack assembly
E3	BRN(1)	RR NTSC SH	Shield for terminals No. 10 and No. 11
E4	YEL	SYSTEM ACC	Rear controller and screen
E5	BRN(1)	RES AUDIO OUT SH	Shield for terminals No. 6, No. 13, and No. 14
E6	RED	RES AUDIO OUT L	Rear controller and screen
E7	BRN(1)	GA-NET RR BUS SH	Shield for terminals No. 8 and No. 16
E8	PUR	GA-NET RR BUS-	Rear controller and screen
E9	PUR	AUX VIDEO IN	RES auxiliary jack assembly
E10	PNK	RR NTSC GND	Rear controller and screen
E11	BLU	RR NTSC	Rear controller and screen
E13	WHT	RES AUDIO OUT GND	Rear controller and screen
E14	BLK	RES AUDIO OUT R	Rear controller and screen
E16	LT BLU	GA-NET RR BUS+	Rear controller and screen
(1) The shielded wires have a heat-shrink tube insulating the outside of the wire. The color of the insulating tube, typically black or dark gray, may not match the color of the wire listed on the schematic.